As much as we all love Modems and Serial Connections, there are good reasons we nowadays use either Twisted-Pair or Fiber-based Ethernet for most networking needs.
- But not every device, espechally older ones come with Ethernet NICs, much less Support for it.
- Whilst Projects like Wifi232 do exist, WLAN isn't always an option and certainly cannot duplicate features like Wake-on-Ring (basically the same as Wake-on-LAN but for modems)...
- These do necessitate Power over Ethernet (or other means of powering the device).
- Whilst Projects like Wifi232 do exist, WLAN isn't always an option and certainly cannot duplicate features like Wake-on-Ring (basically the same as Wake-on-LAN but for modems)...
NOT being yet another serial device server...
- Similar to a Broadband Modem and Dial-Up Modems, it should just react like any serial-connected modem with DE-9 interface.
- Including the same slow speeds of 75 - 115.200 bps.
- Ideally it'll also allow for an experience similar to the WiFi232 with BBSes...
- Act as an Ethernet Adapter connected over serial.
- This too will slow down, but provide & use direct ethernet support from the system and necessitate said drivers.
3. Attachment Unit Interface Mode
- Many devices do have ethernet, but lack an AUI to connect to
10Base-Tor100Base-TXnetworks prevents the use of these.
- Instead of being a "Device Server" that utilizes custom drivers or otherwise bridges a serial device, it should just act as a transparent Extension Adapter (either similar to
HDBaseTas 1:1 connection or a with (pre-)configured IPv4 addresses across a LAN.
- Configuration Console built in:
9600/8/N/1on a 10p10c rollover serial port.- Activated via a Tubular pin tumbler lock - switch to prevent "breaking out" from configuration by accident.
To prevent being outdated, it should support various other standards by having it's Ethernet modularized.
- A GBIC - Style Transciever module is to be used.
- The module includes both a DC-PSU and an unmanaged 4-port switch
- 1x internal
10Base-TPort (To enable fast connections even on networks not supporting 10 Mbit/s link speed) - 1x
1000Base-Twith Power over Ethernet support - 1x 1000Base-T Port (for connecting other devices)
- 1x
SFPport 10/100/1000 Mbit/s Generic Module Support- Enabling various 10/100/1000 Mbit/s Ethernet Standards ranging from 10Base-T1 to
1000Base-LXand beyond.
- Enabling various 10/100/1000 Mbit/s Ethernet Standards ranging from 10Base-T1 to
- 1x internal
- The module includes both a DC-PSU and an unmanaged 4-port switch
Obviously the inspiration to an extent.
- Originally this Project was intended to be called " Ethernet232 " but that was canned because it doesn't make much sense.
Acctron EtherPocket-SP
- Whilst it is a Parallel Port Ethernet Adaptor, RS-232 has similar data rates peaking around 150 kBit/s.